Passer au contenu
Contact Support
|

Black Friday Mega Sale: 20% Off Everything! Limited Time — Shop Now!

Produits

Categories

All Types

Popular Models

    View All Models

    NO PRODUCTS FOUND FOR YOUR SEARCH.

    • Part

      Bosch 1/2 In. x 1 In. Carbide Tipped Flush Trim V-Groove Bit - 85647M

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention....

      Afficher tous les détails
      $59.95 - $59.95
      $59.95 price
      $59.95 - $59.95
      $59.95 price

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim v-groove bit trims the edges of face frames flush with cabinet sides, while at the same time, cuts a decorative 'V' groove to conceal the seam between the frame and the case. The fully hardened and tempered steel shank provides ultimate durability.

      Benefits
      Bit is used to flush face frame to cabinet side while at same time cutting a v-groove down cabinet joint
      Compact ball-bearing pilot guides bit along edge of material
      Bit can also be used to create a decorative v-groove cut
      Micrograin carbide tips provide superior wear resistance and long life
      $59.95 - $59.95
      $59.95 price
      $59.95 - $59.95
      $59.95 price

    • Part

      Bosch 1/2 In. x 1 In. Carbide-Tipped Double-Flute Flush Trim Router Bit - 85266MC

      Micrograin carbide-tipped router bits for precision, durabilityFully hardened and tempered steel shanks for ultimate durabilityTips engineered with...

      Afficher tous les détails
      $34.95 - $34.95
      $34.95 price
      $34.95 - $34.95
      $34.95 price

      Micrograin carbide-tipped router bits for precision, durabilityFully hardened and tempered steel shanks for ultimate durabilityTips engineered with heat-treating process for extra-fine finish

      Benefits
      Micrograin carbide-tip router bit design
      ensures consistently smooth finish cuts, with superior wear resistance
      Control cut design
      ideal for fast, smooth, flush trim cuts
      Comprehensive line of bits
      features hundreds of profiles for mortising, edge forming, trimming, surface forming, and cabinetry/joinery in wood, plastic and laminate
      Double flute
      for trimming laminates, veneers and similar products
      Reinforced shanks
      feature fully hardened and tempered steel shanks that provide ultimate durability
      Upgraded micrograin carbide
      engineered for precise cuts and for long bit life
      Bosch-exclusive heat-treating process
      provides hardness and withstands high temperatures
      $34.95 - $34.95
      $34.95 price
      $34.95 - $34.95
      $34.95 price

    • Part

      Bosch 1/2 In. x 1 In. Carbide-Tipped Double-Flute Straight Router Bit - 85227MC

      Micrograin carbide-tipped router bits for precision, durabilityFully hardened and tempered steel shanks for ultimate durabilityTips engineered with...

      Afficher tous les détails
      $35.95 - $35.95
      $35.95 price
      $35.95 - $35.95
      $35.95 price

      Micrograin carbide-tipped router bits for precision, durabilityFully hardened and tempered steel shanks for ultimate durabilityTips engineered with heat-treating process for extra-fine finish

      Benefits
      Micrograin carbide-tip router bit design
      ensures consistently smooth finish cuts, with superior wear resistance
      Double flute design
      allows for a better finish in harder materials, with smooth finish and good feed rates
      Comprehensive line of bits
      features hundreds of profiles for mortising, edge forming, trimming, surface forming, and cabinetry/joinery in wood, plastic and laminate
      Strong webbing and heavy cutter backing
      extend bit life, with balanced cutting and minimal vibration
      Reinforced shanks
      feature fully hardened and tempered steel shanks that provide ultimate durability
      Upgraded micrograin carbide
      engineered for precise cuts and for long bit life
      Bosch-exclusive heat-treating process
      provides hardness and withstands high temperatures
      $35.95 - $35.95
      $35.95 price
      $35.95 - $35.95
      $35.95 price

    • Part

      Bosch 1/2 In. x 1 In. Carbide-Tipped Double-Flute Top-Bearing Straight Trim Router Bit - 85680MC

      Micrograin carbide-tipped router bits for precision, durabilityFully hardened and tempered steel shanks for ultimate durabilityTips engineered with...

      Afficher tous les détails
      $55.95 - $55.95
      $55.95 price
      $55.95 - $55.95
      $55.95 price

      Micrograin carbide-tipped router bits for precision, durabilityFully hardened and tempered steel shanks for ultimate durabilityTips engineered with heat-treating process for extra-fine finish

      Benefits
      Micrograin carbide-tip router bit design
      ensures consistently smooth finish cuts, with superior wear resistance
      Designed for pattern routing
      top-mounted ball bearing rides against template, to execute pattern routing
      Comprehensive line of bits
      features hundreds of profiles for mortising, edge forming, trimming, surface forming, and cabinetry/joinery in wood, plastic and laminate
      Shielded, compact ball-bearing pilot
      guides bit along edge of material
      Reinforced shanks
      feature fully hardened and tempered steel shanks that provide ultimate durability
      Upgraded micrograin carbide
      engineered for precise cuts and for long bit life
      Bosch-exclusive heat-treating process
      provides hardness and withstands high temperatures
      $55.95 - $55.95
      $55.95 price
      $55.95 - $55.95
      $55.95 price

    • Part

      Bosch 1/2 In. x 1 In. Carbide-Tipped Triple-Flute Flush Trim Router Bit - 85216MC

      Micrograin carbide-tipped router bits for precision, durabilityFully hardened and tempered steel shanks for ultimate durabilityTips engineered with...

      Afficher tous les détails
      $44.95 - $44.95
      $44.95 price
      $44.95 - $44.95
      $44.95 price

      Micrograin carbide-tipped router bits for precision, durabilityFully hardened and tempered steel shanks for ultimate durabilityTips engineered with heat-treating process for extra-fine finish

      Benefits
      Micrograin carbide-tip router bit design
      ensures consistently smooth finish cuts, with superior wear resistance
      Triple-flute design
      provides exceptional smoothness and finish quality for trimming laminates, veneers and similar materials
      Comprehensive line of bits
      features hundreds of profiles for mortising, edge forming, trimming, surface forming, and cabinetry/joinery in wood, plastic and laminate
      Shielded, compact ball-bearing pilot
      guides bit along edge of material
      Reinforced shanks
      feature fully hardened and tempered steel shanks that provide ultimate durability
      Upgraded micrograin carbide
      engineered for precise cuts and for long bit life
      Bosch-exclusive heat-treating process
      provides hardness and withstands high temperatures
      $44.95 - $44.95
      $44.95 price
      $44.95 - $44.95
      $44.95 price

    • Part

      Bosch 1/2 In. x 1 In. Solid Carbide 3-Flute Downcut Spiral Bit - 85974M

      Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Downcut spiral...

      Afficher tous les détails
      $59.84 - $59.84
      $59.84 price
      $59.84 - $59.84
      $59.84 price

      Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Downcut spiral is used for downward chip flow and the best finish on the top side of the work piece. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut

      Benefits
      Ideal for penetrating hard-to-route materials under reduced spindle speeds or horsepower
      Solid carbide for durability
      Downcut holds the material and forces chips down during routing
      Recommended for CNC or router table use
      Balanced cutting with minimal vibration
      $59.84 - $59.84
      $59.84 price
      $59.84 - $59.84
      $59.84 price

    • Part

      Bosch 1/2 In. x 1-1/2 In. Carbide Tipped 2-Flute Straight Bit - 85242M

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention....

      Afficher tous les détails
      $38.95 - $38.95
      $38.95 price
      $38.95 - $38.95
      $38.95 price

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully hardened and tempered steel shank provides ultimate durability.

      Benefits
      2 flute design provides a smooth finish and good feed rates
      Specially designed tips provide fast plunge cutting
      Micrograin carbide tips give excellent smoothness of cut and long life
      Strong webbing and heavy cutter backing extend bit life
      Balanced cutting with minimal vibration
      $38.95 - $38.95
      $38.95 price
      $38.95 - $38.95
      $38.95 price

    • Part

      Bosch 1/2 In. x 1-1/2 In. Carbide Tipped 2-Flute Straight Bit - 85256M

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention....

      Afficher tous les détails
      $50.95 - $50.95
      $50.95 price
      $50.95 - $50.95
      $50.95 price

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully hardened and tempered steel shank provides ultimate durability.

      Benefits
      2 flute design provides a smooth finish and good feed rates
      Specially designed tips provide fast plunge cutting
      Micrograin carbide tips give excellent smoothness of cut and long life
      Strong webbing and heavy cutter backing extend bit life
      Balanced cutting with minimal vibration
      $50.95 - $50.95
      $50.95 price
      $50.95 - $50.95
      $50.95 price

    • Part

      Bosch 1/2 In. x 1-1/2 In. Carbide Tipped 2-Flute Template Trim Bit - 85601M

      Premium-quality Micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention....

      Afficher tous les détails
      $51.95 - $51.95
      $51.95 price
      $51.95 - $51.95
      $51.95 price

      Premium-quality Micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the work piece. Double flute trim bit allows for a smoother finish. The fully hardened and tempered steel shank provides ultimate durability.

      Benefits
      Provides smooth cuts for laminate trimming, cutouts, and pattern cutting
      Micrograin carbide tips for long life
      Control cut design helps minimize kickback
      Provided with two ball bearings to widen the bearing surface and reduce template wear
      $51.95 - $51.95
      $51.95 price
      $51.95 - $51.95
      $51.95 price

    • Part

      Bosch 1/2 In. x 1-1/2 In. Carbide Tipped 3-Flute Template Trim Bit - 85602M

      Premium-quality Micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention....

      Afficher tous les détails
      $62.95 - $62.95
      $62.95 price
      $62.95 - $62.95
      $62.95 price

      Premium-quality Micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the work piece. Triple flute trim bit gives an extra smooth finish. The fully hardened and tempered steel shank provides ultimate durability.

      Benefits
      Triple flute design for exceptional smoothness and finish quality
      Used on heavier work when cutting with a template
      Balanced cutting for minimal vibration
      Can be used with two ball bearings to widen the bearing surface and reduce template wear
      $62.95 - $62.95
      $62.95 price
      $62.95 - $62.95
      $62.95 price

    • Part

      Bosch 1/2 In. x 1-1/2 In. Carbide-Tipped Double-Flute Straight Router Bit - 85242MC

      Micrograin carbide-tipped router bits for precision, durabilityFully hardened and tempered steel shanks for ultimate durabilityTips engineered with...

      Afficher tous les détails
      $38.95 - $38.95
      $38.95 price
      $38.95 - $38.95
      $38.95 price

      Micrograin carbide-tipped router bits for precision, durabilityFully hardened and tempered steel shanks for ultimate durabilityTips engineered with heat-treating process for extra-fine finish

      Benefits
      Micrograin carbide-tip router bit design
      ensures consistently smooth finish cuts, with superior wear resistance
      Double flute design
      allows for a better finish in harder materials, with smooth finish and good feed rates
      Comprehensive line of bits
      features hundreds of profiles for mortising, edge forming, trimming, surface forming, and cabinetry/joinery in wood, plastic and laminate
      Strong webbing and heavy cutter backing
      extend bit life, with balanced cutting and minimal vibration
      Reinforced shanks
      feature fully hardened and tempered steel shanks that provide ultimate durability
      Upgraded micrograin carbide
      engineered for precise cuts and for long bit life
      Bosch-exclusive heat-treating process
      provides hardness and withstands high temperatures
      $38.95 - $38.95
      $38.95 price
      $38.95 - $38.95
      $38.95 price

    • Part

      Bosch 1/2 In. x 1-1/2 In. Carbide-Tipped Double-Flute Template Trim Router Bit - 85601MC

      Micrograin carbide-tipped router bits for precision, durabilityFully hardened and tempered steel shanks for ultimate durabilityTips engineered with...

      Afficher tous les détails
      $51.95 - $51.95
      $51.95 price
      $51.95 - $51.95
      $51.95 price

      Micrograin carbide-tipped router bits for precision, durabilityFully hardened and tempered steel shanks for ultimate durabilityTips engineered with heat-treating process for extra-fine finish

      Benefits
      Micrograin carbide-tip router bit design
      ensures consistently smooth finish cuts, with superior wear resistance
      Double-flute template trim bit
      provides smooth cuts for laminate trimming, cutouts, and pattern cutting
      Comprehensive line of bits
      features hundreds of profiles for mortising, edge forming, trimming, surface forming, and cabinetry/joinery in wood, plastic and laminate
      Two ball bearings
      designed to widen the bearing surface and reduce template wear
      Reinforced shanks
      feature fully hardened and tempered steel shanks that provide ultimate durability
      Upgraded micrograin carbide
      engineered for precise cuts and for long bit life
      Bosch-exclusive heat-treating process
      provides hardness and withstands high temperatures
      $51.95 - $51.95
      $51.95 price
      $51.95 - $51.95
      $51.95 price

    • Part

      Bosch 1/2 In. x 1-1/4 In. Carbide Tipped 1-Flute Straight Bit - 85426M

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention....

      Afficher tous les détails
      $34.95 - $34.95
      $34.95 price
      $34.95 - $34.95
      $34.95 price

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Single flute allows for faster feed rates in softer materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully hardened and tempered steel shank provides ultimate durability.

      Benefits
      Single flute design for faster feed rates and high production
      Specially designed tips provide fast plunge cutting
      Micrograin carbide tips give excellent smoothness of cut and long life
      Control cut design helps minimize kickback
      Balanced cutting with minimal vibration
      $34.95 - $34.95
      $34.95 price
      $34.95 - $34.95
      $34.95 price

    • Part

      Bosch 1/2 In. x 1-1/4 In. Carbide Tipped 2-Flute Straight Bit - 84210M

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention....

      Afficher tous les détails
      $38.95 - $38.95
      $38.95 price
      $38.95 - $38.95
      $38.95 price

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Double flute allows for a better finish in harder materials, while carbide tip incorporates the wear resistance of carbide and the toughness of a steel body. The fully hardened and tempered steel shank provides ultimate durability.

      Benefits
      2 flute design provides a smooth finish and good feed rates
      Specially designed tips provide fast plunge cutting
      Micrograin carbide tips give excellent smoothness of cut and long life
      Strong webbing and heavy cutter backing extend bit life
      Balanced cutting with minimal vibration
      $38.95 - $38.95
      $38.95 price
      $38.95 - $38.95
      $38.95 price

    • Part

      Bosch 1/2 In. x 1-1/4 In. Carbide Tipped 2-Flute Top Bearing Straight Trim Bit - 85672M

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention....

      Afficher tous les détails
      $49.95 - $49.95
      $49.95 price
      $49.95 - $49.95
      $49.95 price

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the work piece. Double flute trim bit allows for a smoother finish. The fully hardened and tempered steel shank provides ultimate durability.

      Benefits
      Top mounted ball bearing rides against template for pattern routing
      Shielded, compact ball-bearing pilot guides bit along edge of material
      Micrograin carbide tips provide superior wear resistance and long life
      Balanced cutting with minimal vibration
      $49.95 - $49.95
      $49.95 price
      $49.95 - $49.95
      $49.95 price

    • Part

      Bosch 1/2 In. x 1-1/4 In. High Speed Steel Pilot Panel Down Spiral Bit - 85187

      Introducing the Bosch 85187! Upgrade your woodworking game with this top-of-the-line 1/2 In. x 1-1/4 In. High-Speed Steel Pilot Panel Down Spiral B...

      Afficher tous les détails
      $32.95 - $32.95
      $32.95 price
      $32.95 - $32.95
      $32.95 price

      Introducing the Bosch 85187! Upgrade your woodworking game with this top-of-the-line 1/2 In. x 1-1/4 In. High-Speed Steel Pilot Panel Down Spiral Bit. Crafted with precision and durability in mind, this Bosch masterpiece is designed to take your projects to new heights.

      Say goodbye to rough edges and hello to flawless finishes! The spiral design of this bit allows for a smooth and efficient cutting experience, ensuring clean and precise results every time. Whether you're working on panels, laminates, or other materials, this Bosch bit will effortlessly glide through with ease.

      Made from high-speed steel, this bit is built to last. Its exceptional strength and resilience make it a reliable companion for both professional woodworkers and DIY enthusiasts alike. Experience the power and precision that only Bosch can deliver.

      Don't settle for average. Elevate your woodworking experience with the Bosch 85187 1/2 In. x 1-1/4 In. High-Speed Steel Pilot Panel Down Spiral Bit. Trust in Bosch's legacy of excellence and unlock the true potential of your projects today!
      $32.95 - $32.95
      $32.95 price
      $32.95 - $32.95
      $32.95 price

    • Part

      Bosch 1/2 In. x 1-1/4 In. Solid Carbide 2-Flute Downcut Spiral Bit - 85906M

      Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Downcut spiral...

      Afficher tous les détails
      $121.95 - $121.95
      $121.95 price
      $121.95 - $121.95
      $121.95 price

      Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Downcut spiral is used for downward chip flow and the best finish on the top side of the work piece. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut

      Benefits
      For through cutting where downward pressure and chip removal is desired
      Solid carbide for durability
      For high-duty cycle applications
      Recommended for CNC or router table use
      Balanced cutting with minimal vibration
      $121.95 - $121.95
      $121.95 price
      $121.95 - $121.95
      $121.95 price

    • Part

      Bosch 1/2 In. x 1-1/4 In. Solid Carbide 2-Flute Upcut Spiral Bit - 85914M

      Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Upcut spiral i...

      Afficher tous les détails
      $91.01 - $91.01
      $91.01 price
      $91.01 - $91.01
      $91.01 price

      Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Upcut spiral is used for upward chip evacuation and the best finish on the bottom side of work piece. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut.

      Benefits
      Upcut design yields superior chip removal for a smooth finish
      Solid carbide for durability
      For high-duty cycle applications
      Recommended for CNC or router table use
      Balanced cutting with minimal vibration
      $91.01 - $91.01
      $91.01 price
      $91.01 - $91.01
      $91.01 price

    • Part

      Bosch 1/2 In. x 1-1/4 In. Solid Carbide 3-Flute Upcut Spiral Bit - 85961M

      Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Upcut spiral i...

      Afficher tous les détails
      $142.95 - $142.95
      $142.95 price
      $142.95 - $142.95
      $142.95 price

      Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Upcut spiral is used for upward chip evacuation and the best finish on the bottom side of work piece. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut

      Benefits
      Ideal for penetrating hard-to-route materials under reduced spindle speeds or horsepower
      Solid carbide for durability
      Upcut yields superior chip removal and a smooth finish
      Recommended for CNC or router table use
      Balanced cutting with minimal vibration
      $142.95 - $142.95
      $142.95 price
      $142.95 - $142.95
      $142.95 price

    • Part

      Bosch 1/2 In. x 1-1/8 In. High Speed Steel 1-Flute Pilot Panel Straight Bit - 85188

      Introducing the Bosch 85188 1/2 In. x 1-1/8 In. High Speed Steel 1-Flute Pilot Panel Straight Bit - the ultimate tool for precision woodworking. Cr...

      Afficher tous les détails
      $30.95 - $30.95
      $30.95 price
      $30.95 - $30.95
      $30.95 price

      Introducing the Bosch 85188 1/2 In. x 1-1/8 In. High Speed Steel 1-Flute Pilot Panel Straight Bit - the ultimate tool for precision woodworking. Crafted with premium high-speed steel, this straight bit boasts exceptional durability and cutting performance.

      Designed with a 1-flute pilot panel, this Bosch bit delivers precise and clean cuts every time, making it a must-have for any woodworking enthusiast or professional. Whether you're working on cabinetry, furniture, or other woodworking projects, this straight bit is sure to deliver outstanding results.

      Featuring a 1/2-inch shank diameter and a 1-1/8-inch cutting length, this Bosch bit offers versatility and flexibility in various applications. Its high-speed steel construction ensures long-lasting sharpness and resistance to wear and tear.

      With the Bosch 85188 straight bit, you can achieve smooth and accurate cuts, allowing you to bring your woodworking visions to life. Upgrade your toolkit with this reliable and high-performing tool. Experience the precision, durability, and quality that Bosch is renowned for.

      Order the Bosch 85188 1/2 In. x 1-1/8 In. High Speed Steel 1-Flute Pilot Panel Straight Bit today and take your woodworking projects to new heights.
      $30.95 - $30.95
      $30.95 price
      $30.95 - $30.95
      $30.95 price

    • Part

      Bosch 1/2 In. x 1-11/16 In. SDS-plus Stop Bit - HCSTP2083

      Key masonry applications, ranging from suspension of struts for electrical and air systems to hardware for overhead piping and sprinkler systems, B...

      Afficher tous les détails
      $38.95 - $38.95
      $38.95 price
      $38.95 - $38.95
      $38.95 price

      Key masonry applications, ranging from suspension of struts for electrical and air systems to hardware for overhead piping and sprinkler systems, Bosch stop bits bring precision, speed and professionalism to a task once marked by guess work and drill bits marked with tape. Applications are designed to incorporate drop-in anchors. A steel collar on each bit marks the precise depth of the hole. Once the collar is flush with the concrete surface, the correct depth is reached.

      Benefits
      Stop collar prevents over-drilling for shallow anchor installations
      Most common shallow anchor diameters
      Bosch manufactured carbide tip for long life
      SDS-plus® shank
      Better dust removal with spiral flute design
      $38.95 - $38.95
      $38.95 price
      $38.95 - $38.95
      $38.95 price

    • Part

      Bosch 1/2 In. x 1-3/16 In. Carbide Tipped 1-Flute Pilot Panel Concave Bit - 85246M

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention....

      Afficher tous les détails
      $32.95 - $32.95
      $32.95 price
      $32.95 - $32.95
      $32.95 price

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Pilot panel bit has a drill-through point that plunges through the material, and is used for window and door cutouts in abrasive insulation materials, plywood, and paneling. The fully hardened and tempered steel shank provides ultimate durability.

      Benefits
      Single flute allows for faster feed rates
      Concave grind offers a faster cut
      For window and door cutouts in abrasive insulation materials, plywood, and paneling
      Micrograin carbide tip provides superior wear resistance and long life
      Drill-through pilot for guiding on templet or framing after panel has been mounted
      $32.95 - $32.95
      $32.95 price
      $32.95 - $32.95
      $32.95 price

    • Part

      Bosch 1/2 In. x 1-3/16 In. Carbide Tipped 1-Flute Pilot Panel Straight Bit - 85246

      Introducing the Bosch 85246, the ultimate tool for precision and efficiency in your woodworking projects. This 1/2 In. x 1-3/16 In. carbide tipped ...

      Afficher tous les détails
      $29.95 - $29.95
      $29.95 price
      $29.95 - $29.95
      $29.95 price

      Introducing the Bosch 85246, the ultimate tool for precision and efficiency in your woodworking projects. This 1/2 In. x 1-3/16 In. carbide tipped 1-flute pilot panel straight bit is designed to deliver flawless results every time.

      Crafted with the highest quality materials, this Bosch bit ensures exceptional durability and long-lasting performance. Its carbide tipped construction guarantees superior cutting power, allowing you to effortlessly shape and trim various materials with ease.

      The 1-flute design of this pilot panel straight bit provides precise control and smooth cutting action. Whether you're working on cabinet doors, panels, or any other woodworking project, this versatile tool will help you achieve clean and professional results.

      Don't waste time on subpar tools that compromise the quality of your work. Upgrade to the Bosch 85246 and experience the difference it makes in your woodworking endeavors. Take your craftsmanship to new heights with this reliable and efficient straight bit.

      Invest in the Bosch 85246 today and witness the perfect combination of precision, durability, and performance. Elevate your woodworking game and unleash your creativity like never before.
      $29.95 - $29.95
      $29.95 price
      $29.95 - $29.95
      $29.95 price

    • Part

      Bosch 1/2 In. x 1-3/16 In. Carbide Tipped 2-Flute Pilot Panel Bit - 85429M

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention....

      Afficher tous les détails
      $56.95 - $56.95
      $56.95 price
      $56.95 - $56.95
      $56.95 price

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Pilot panel bit has a drill-through point that plunges through the material, and is used for window and door cutouts in abrasive insulation materials, plywood, and paneling. The fully hardened and tempered steel shank provides ultimate durability.

      Benefits
      Two flutes give smooth cuts and even feed rates without chatter
      Micrograin carbide tips provide superior wear resistance and long life
      For window and door cutouts in abrasive insulation materials, plywood, and paneling
      Drill-through pilot for guiding on templet or framing after panel has been mounted
      $56.95 - $56.95
      $56.95 price
      $56.95 - $56.95
      $56.95 price

    • Part

      Bosch 1/2 In. x 1-5/8 In. Solid Carbide 2-Flute Downcut Spiral Bit - 85918M

      Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Downcut spiral...

      Afficher tous les détails
      $91.31 - $91.31
      $91.31 price
      $91.31 - $91.31
      $91.31 price

      Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Downcut spiral is used for downward chip flow and the best finish on the top side of the work piece. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut.

      Benefits
      For through cutting where downward pressure and chip removal is desired
      Solid carbide for durability
      For high-duty cycle applications
      Recommended for CNC or router table use
      Balanced cutting with minimal vibration
      $91.31 - $91.31
      $91.31 price
      $91.31 - $91.31
      $91.31 price

    • Part

      Bosch 1/2 In. x 1-5/8 In. Solid Carbide 2-Flute Upcut Spiral Bit - 85917M

      Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Upcut spiral i...

      Afficher tous les détails
      $91.31 - $91.31
      $91.31 price
      $91.31 - $91.31
      $91.31 price

      Premium-quality micrograin solid carbide bit is precision ground for an extra-fine finish with maximum sharpness and edge retention. Upcut spiral is used for upward chip evacuation and the best finish on the bottom side of work piece. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut

      Benefits
      Upcut design yields superior chip removal for a smooth finish
      Solid carbide for durability
      For high-duty cycle applications
      Recommended for CNC or router table use
      Balanced cutting with minimal vibration
      $91.31 - $91.31
      $91.31 price
      $91.31 - $91.31
      $91.31 price

    • Part

      Bosch 1/2 In. x 1-9/16 In. Carbide Tipped Bullnose Bit - 84436M

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention....

      Afficher tous les détails
      $139.95 - $139.95
      $139.95 price
      $139.95 - $139.95
      $139.95 price

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Bullnose bit creates attractive decorative edging and grooving that gives a unique finish to the work piece. The fully hardened and tempered steel shank provides ultimate durability.

      Benefits
      Edge forming used for window sills, shelves, or stair treads
      Recommended for use with router table
      Smoothly radiused edge requires little or no sanding before applying finish
      Micrograin carbide tips provide superior wear resistance and long life
      $139.95 - $139.95
      $139.95 price
      $139.95 - $139.95
      $139.95 price

    • Part

      Bosch 1/2 In. x 1/2 In. Carbide Tipped Hinge Mortising Bit - 85234M

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention....

      Afficher tous les détails
      $39.88 - $39.88
      $39.88 price
      $39.88 - $39.88
      $39.88 price

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Mortising bits are ideal for surfacing operations and cut fast for mortises. The fully hardened and tempered steel shank provides ultimate durability.

      Benefits
      Use with 82816 for 1/4 In. shank, and use with 82818 for 1/2 In. shank
      Control cut design helps minimize kickback
      Use with hinge template and templet guide for optimal results
      Balanced cutting with minimal vibration
      Additional chip clearance for fast mortising
      $39.88 - $39.88
      $39.88 price
      $39.88 - $39.88
      $39.88 price

    • Part

      Bosch 1/2 In. x 1/2 In. Carbide Tipped Rabbeting Bit - 85614M

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention....

      Afficher tous les détails
      $60.95 - $60.95
      $60.95 price
      $60.95 - $60.95
      $60.95 price

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Rabbeting bit can be used for joining boards or for letting in back panels. The fully hardened and tempered steel shank provides ultimate durability.

      Benefits
      Cuts rabbeted edges for joints, drawer fronts, and other applications
      Micrograin carbide tips provide superior wear resistance and long life
      Control cut design helps minimize kickback
      Compact ball-bearing pilot guides bit along edge of material
      For making rabbeting cuts without the use of a router guide
      $60.95 - $60.95
      $60.95 price
      $60.95 - $60.95
      $60.95 price

    • Part

      Bosch 1/2 In. x 1/2 In. Carbide Tipped Rabbeting Bit - 85615M

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention....

      Afficher tous les détails
      $66.95 - $66.95
      $66.95 price
      $66.95 - $66.95
      $66.95 price

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Rabbeting bit can be used for joining boards or for letting in back panels. The fully hardened and tempered steel shank provides ultimate durability.

      Benefits
      Cuts rabbeted edges for joints, drawer fronts, and other applications
      Micrograin carbide tips provide superior wear resistance and long life
      Control cut design helps minimize kickback
      Compact ball-bearing pilot guides bit along edge of material
      For making rabbeting cuts without the use of a router guide
      $66.95 - $66.95
      $66.95 price
      $66.95 - $66.95
      $66.95 price

    • Part

      Bosch 1/2 In. x 1/2 In. Carbide-Tipped Hinge Mortising Router Bit - 85234B

      Micrograin carbide-tipped router bits for precision, durabilityFully hardened and tempered steel shanks for ultimate durabilityTips engineered with...

      Afficher tous les détails
      $47.95 - $47.95
      $47.95 price
      $47.95 - $47.95
      $47.95 price

      Micrograin carbide-tipped router bits for precision, durabilityFully hardened and tempered steel shanks for ultimate durabilityTips engineered with heat-treating process for extra-fine finish

      Benefits
      Micrograin carbide-tip router bit design
      ensures consistently smooth finish cuts, with superior wear resistance
      Shear-angle design
      provides faster routing, cleaner cuts and extended life
      Comprehensive line of bits
      features hundreds of profiles for mortising, edge forming, trimming, surface forming, and cabinetry/joinery in wood, plastic and laminate
      Designed for hinge mortising
      made to use with 82816 for 1/4 In. shank and with hinge template and templet guide for optimal results
      Reinforced shanks
      feature fully hardened and tempered steel shanks that provide ultimate durability
      Upgraded micrograin carbide
      engineered for precise cuts and for long bit life
      Bosch-exclusive heat-treating process
      provides hardness and withstands high temperatures
      $47.95 - $47.95
      $47.95 price
      $47.95 - $47.95
      $47.95 price

    • Part

      Bosch 1/2 In. x 1/2 In. Carbide-Tipped Rabbeting Router Bit - 85614MC

      Micrograin carbide-tipped router bits for precision, durabilityFully hardened and tempered steel shanks for ultimate durabilityTips engineered with...

      Afficher tous les détails
      $60.95 - $60.95
      $60.95 price
      $60.95 - $60.95
      $60.95 price

      Micrograin carbide-tipped router bits for precision, durabilityFully hardened and tempered steel shanks for ultimate durabilityTips engineered with heat-treating process for extra-fine finish

      Benefits
      Micrograin carbide-tip router bit design
      ensures consistently smooth finish cuts, with superior wear resistance
      Compact ball-bearing pilot
      guides bit along edge of material to make rabbeting cuts without the use of a router guide
      Comprehensive line of bits
      features hundreds of profiles for mortising, edge forming, trimming, surface forming, and cabinetry/joinery in wood, plastic and laminate
      Control-cut bit
      designed for rabbeted edges for joints, drawer fronts and other applications
      Reinforced shanks
      feature fully hardened and tempered steel shanks that provide ultimate durability
      Upgraded micrograin carbide
      engineered for precise cuts and for long bit life
      Bosch-exclusive heat-treating process
      provides hardness and withstands high temperatures
      $60.95 - $60.95
      $60.95 price
      $60.95 - $60.95
      $60.95 price

    • Part

      Bosch 1/2 In. x 1/4 In. Carbide Tipped 2-Flute Top Bearing Dado Clean Out Bit - 85674M

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention....

      Afficher tous les détails
      $61.95 - $61.95
      $61.95 price
      $61.95 - $61.95
      $61.95 price

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Flush trim bits are used for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the work piece. Double flute trim bit allows for a smoother finish. The fully hardened and tempered steel shank provides ultimate durability.

      Benefits
      Top mounted ball bearing rides against template for pattern routing
      Shielded, compact ball-bearing pilot guides bit along edge of material
      Micrograin carbide tips provide superior wear resistance and long life
      Balanced cutting with minimal vibration
      $61.95 - $61.95
      $61.95 price
      $61.95 - $61.95
      $61.95 price

    • Part

      Bosch 1/2 In. x 10 In. BlueGranite Turbo Carbide Hammer Drill Bit - HCBG17T

      Tested up to 5x longer life than standard bitsFaster drilling with four-grind bit head and milled U-flutesDesigned with PowerGrip shank for aggress...

      Afficher tous les détails
      $21.95 - $21.95
      $21.95 price
      $21.95 - $21.95
      $21.95 price

      Tested up to 5x longer life than standard bitsFaster drilling with four-grind bit head and milled U-flutesDesigned with PowerGrip shank for aggressive bit grip

      Benefits
      Upgraded build - delivers 5x life and 2x speed over standard masonry bits
      PowerGrip round shank
      provides better grip for great speed
      Bosch-made carbide
      delivers outstanding durability under heavy loads
      Four-grind head
      delivers two more cutting angles for longer life and faster speed
      Multi-grind carbide centering tip
      offers accurate starts in brick, masonry and more
      Robust bit head
      provides long life in impact applications
      Milled U-flutes with deep-cut spirals
      delivers fast dust removal
      $21.95 - $21.95
      $21.95 price
      $21.95 - $21.95
      $21.95 price

    • Part

      Bosch 1/2 In. x 10 In. x 12 In. SDS-plus Bulldog Xtreme Carbide Rotary Hammer Drill Bit - HCFC2084

      Efficient upgraded flute design for 25% more holes per chargeStronger carbide-steel connection with Bosch-exclusive bondingHas 4X life in concrete ...

      Afficher tous les détails
      $24.95 - $24.95
      $24.95 price
      $24.95 - $24.95
      $24.95 price

      Efficient upgraded flute design for 25% more holes per chargeStronger carbide-steel connection with Bosch-exclusive bondingHas 4X life in concrete with rebar with 100% full-carbide tip

      Benefits
      Diffusion bonding technology
      provides stronger carbide bond for a durable, longest-lasting bit
      100% full-carbide head
      delivers 4X life in concrete with rebar and longer life in all masonry drilling
      Optimized for heavy-duty and cordless rotary hammers
      fits tools with SDS-plus® chucks
      Variable flute design
      supplies efficient material removal for 25% more holes per charge
      Centric conical tip
      results in rounder holes for precision-anchoring applications
      Wear mark
      assures hole-diameter tolerance for anchoring
      Widest range
      the Bulldog™ Xtreme line offers the widest range of full-head carbide bits
      $24.95 - $24.95
      $24.95 price
      $24.95 - $24.95
      $24.95 price

    • Part

      Bosch 1/2 In. x 11/16 In. Carbide Tipped Beading Bit - 85497M

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention....

      Afficher tous les détails
      $71.95 - $71.95
      $71.95 price
      $71.95 - $71.95
      $71.95 price

      Premium-quality micrograin carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. Beading bit creates attractive decorative edging that gives a unique finish to the work piece. The fully hardened and tempered steel shank provides ultimate durability.

      Benefits
      Used to create attractive, decorative edging
      Micrograin carbide tips provide superior wear resistance and long life
      Control cut design helps minimize kickback
      Compact ball-bearing pilot guides bit along edge of material
      Smoothly radiused edge requires little or no sanding before applying finish
      $71.95 - $71.95
      $71.95 price
      $71.95 - $71.95
      $71.95 price